Demo Setpoints |
|
| Default | |
| On Setpoint (ft.): | 6 |
| Off Setpoint (ft.): | 2 |
| Pump One | |
| On Setpoint (ft.): | 8 |
| Off Setpoint (ft.): | 3 |
| Pump Two | |
| On Setpoint (ft.): | 9 |
| Off Setpoint (ft.): | 3 |
| Wet Well Level | |
| Actual (ft.): | 1.5 |
STEP 2: Depress the Select button. STEP 3: Rotate the Dial clockwise until the red LED rises to the Pump One “off” setpoint (3 ft.) STEP 4: Depress the Set button and hold it until a small audible chirp is heard (approximately 3 seconds). The Pump One “off” setpoint (3 ft.) has now been reprogrammed. |
To Refresh the Animation, Simply Hold Down the Shift Key
and Hit Your Browser's Refresh/Reload Button.
and Hit Your Browser's Refresh/Reload Button.