Demo Setpoints |
|
| Default | |
| On Setpoint (ft.): | 6 |
| Off Setpoint (ft.): | 2 |
| Pump One | |
| On Setpoint (ft.): | 8 |
| Off Setpoint (ft.): | 3 |
| Pump Two | |
| On Setpoint (ft.): | 9 |
| Off Setpoint (ft.): | 3 |
| Wet Well Level | |
| Actual (ft.): | 1.5 |
Now the demonstration will show the 8 Steps of how to change the “off” and “on” setpoints to the Pump One demo setpoints (3 ft. and 8 ft.). STEP 1: Rotate the Dial clockwise until the bottom red LED flashes. It is currently at the default “off” setpoint (2 ft.). |
To Refresh the Animation, Simply Hold Down the Shift Key
and Hit Your Browser's Refresh/Reload Button.
and Hit Your Browser's Refresh/Reload Button.